Frequently Asked Questions
Tag : worktop
No, the correct combination of 12.7mm diameter cutter and 30mm Guide bush has to be used as the offset needed between cutter and guide bush is 8.7mm, any other combination will result in a poor joint.
A masons mitre joint is the joint that is formed using the Trend worktop jigs.
There are a selection of cutters that are suitable: 3/83X1/2TC, 3/83DX1/2TC, 3/85X1/2TC, 3/83MX1/2TC, RT/11X1/2TC & RT/11MX1/2TC.
A butt and scribe joint is the joint formed using the Trend Worktop Jigs.
The guide bush should be 30mm outside diameter.
The worktop jigs are designed to work with a GB30A guide bush and A 12.7mm cutter the male and female curves on the jig are matched with 12.7mm cutters if you use a 12mm cuter the radiuses will not come together properly.