Group

Frequently Asked Questions

Router Cutters FAQs

Frequently Asked Questions about Router Cutters, including the Professional Range, CraftPro Range, Trade Range, Cutter Sets & Spare Parts

15mm.

... Read more

The shank length is 63mm, the overall length is 115mm.

... Read more

The radius is 6.35mm.

... Read more

The overall length of a 5/53X1/2TC is 103mm.

... Read more

Total cutting height is 35mm.

... Read more

A B63B will fit both cutters.

... Read more

B35C is the bearing required.

... Read more

It is a cutter for cutting circular hinges. Trend offer the 104, 105 & 421 groups for this purpose.

... Read more

The part number is ref SPACER/8.

... Read more

The replacement arbor is ref 33/30 on either a 8mm or 1/2 shank diameter.

... Read more

The bearing is part no WP-RBT/CUT/A the circlip is part no WP-RBT/CUT/B

... Read more

To convert the PDS set into a tongue and groove cutter set the following are required SP-34/74TC, SPACER/8

... Read more

The following cutters can be used with the DE6252 multi-functional dovetail jig.|Ref. 31/22X1/4TC for small template DE6254.|Ref. 31/02X1/4HSS for standard template supplied with DE6252. Cutters L120X1/4TC and 31/2X1/4TC can also be used.|Ref. 31/20X8MMTC for large dovetail template DE6253.|Ref. 61/06, 61/08 and 61/01X1/4TC for dowel template DE6256.|Ref. 3/40LX1/4TC for 8mm finger template DE6255.

... Read more

The cutter is 3/76X1/4TC or C021AX1/4TC.

... Read more

Using five cutters the minimum material thickness is 31mm, and maximum material thickness is 36mm. For less cutters consult the catalogue or cutter instructions.

... Read more

A good way of hiding the joint is to hi-lite it. A  V groove can be machined to disguise the joint by using the 46/85X1/4TC. The cutter can also trim at the same time.

... Read more

We offer an extra long two flute router cutter ref 3/86X1/2TC that has a 75mm cut length and 133mm overall length for use with the lightweight honeycomb worktops. The tool must only be used in a professional router with an 80mm plunge and suitable one-piece multi-slit collet fitted to ensure safe retraction into the router base.

... Read more

We offer an extra long two flute router cutter ref TR44Dx1/2TC that has a 70mm cut length and 115mm overall length for use with the lightweight honeycomb worktops. The tool must only be used in a professional router with an 80mm plunge and suitable one-piece multi-slit collet fitted to ensure safe retraction into the router base.

... Read more

The 46/39LX1/2TC rebate cutter has been introduced for this purpose. The cutter shank is 60mm long. The tool is supplied with four ball bearings of different diameters for different rebate sizes.

... Read more

You can not re-sharpen the 10/99 because the dimensions for the tongue and groove will change making them incompatible, however, the pocket whetstones if used will help to keep a keen edge on the carbide.

... Read more

A rule joint can be cut with either the OCTACUT sets or something like the 7/5X1/4TC and 6/5X1/4TC cutters.

... Read more

The part number is ANUT/46/82.

... Read more

We now offer a 60 degrees V-groove with a 1/4 shank (ref 11/20X1/4TC) and also a larger diameter 45 degrees V-groove which has a 19.1mm diameter by 1/2 shank (ref 11/41X1/2TC).

... Read more

The reference is SPACER/8.

... Read more

The cutter required is trend ref 36/19X1/4TC.

... Read more

The length is 6.35mm.

... Read more

The cutter that will give a fine finish on both veneers is either the 14/1x1/2TC or 14/2x1/2TC, up and down shears.

... Read more

The holes are 6mm and 24mm between centre.

... Read more

 Yes, B16B with a diameter of 5/8 and B19B with a diameter of 3/4 both bearings have a bore size of 1/8.

... Read more

The overall length of a 3/83X1/2TC is 108mm

... Read more

No, due to safety reasons, 63mm cut depth and 115mm overall length is all that is available e.g. 3/75X1/2TC, TR37X1/2TC, C172X1/2TC.

... Read more

Protection times are 10mm = 1/2 hour (30 mins), 15mm = 3/4 hour (45 mins), 20mm = 1 hour (60 mins).

... Read more

The overall length is 109mm.

... Read more

34/15TC.

... Read more

The overall length of a 3/82X1/2TC is 79mm.

... Read more

The grub screw size is M4x6mm.

... Read more

The shank length is 57mm the overall length is 108mm.

... Read more

Reference SL/GG.

... Read more

The overall length is 99mm.

... Read more

To work from the face of the door use cutter 346X1/2TC, or if you want to work on the edge of the door use cutter 3/6X1/4TC.

... Read more

The part number is ref B/WASH/14.

... Read more

The overall length of a 3/83MX1/2TC is 84mm.

... Read more

If you download our catalogue and look at pages 110 &111 or click the link below, it shows the cutters and all the spare parts related to them. 

Router Cutter Spare Parts:

... Read more