C199X1/2TC - Double guided trimmer 19.1mm x 50mm

Name: C199X1/2TC - Double guided trimmer 19.1mm x 50mm
SKU: C199X1/2TC
Price: 67.24 AUD
Availability: InStock

C199X1/2TC

A$134.48

Trend Craft Pro 1/2in shank double bearing guided trimmer cutter - 12.7mm diameter Two Flute Carbide tips.

Top and bottom bearings allows the work to be fed with bottom or top template to prevent tear out on short grain for a premium finish.
50mm cutting depth for replicating deep profiles cleanly and professional. Double bearing is ideal for router table work.
Two flute carbide TCT tips for clean, professional finish on timber, plastic laminates and veneers.
PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices.

Product Image	Product Ref	Description	Price for 1
	B19	Trend Router Cutter Bearing - for 1/4in shank mounting High quality ball bearing for free running against an edge to prevent heat build up. 1/4in inside diameter for direct fit to router shanks and arbors. 3/4in outside diameter for matched fit to trimming and templating cutters. Bearings are grease packed for maximum efficiency and lifespan. Shielding to both sides of the bearing prevents penetration of dust for maximum performance.	A$13.52
	B19C	Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter.	A$20.44
Out of Stock	COLL/12	Collar Packs are used for cutters with shank mounted bearings. Packs include one collar, grub screw and hex key.	A$6.56
	SP-I	Spare part packs make ordering spares easier. Packs include, hex key (if required), screw, washer and shield (if required).	A$7.32