Group

KWJ750P - Pro Multi-material worktop jig for up to 750mm worktop

KWJ750P
A$249.98

Pro Multi-material jig for worktop joints 150mm - 750mm

  • FRONT EDGE SETTING All settings are done from the front edge eliminating any discrepancies from scribing or when using non-standard width worktops
  • EASY SET REFERENCE WINDOW Fast set up for any backset, simply align to a measured line
  • 5 BACKSET OPTIONS (3, 5, 10, 24, 35mm) to meet the demands of new materials, edge profiles and trends
  • FLUSH EDGE COMPATABILITY Allows worktops to be cut flush with door faces for handleless contemporary styles without additional measuring or marking up
  • SINGLE PASS JOINT CUTTING ON NARROWER BACKSETS WITH THINNER WORKTOPS Minimises strain on the router and extends cutter life
  • FAST JOINTING Cuts a full male and female joint in 15 minutes including setting up
  • MULTIPLE WORKTOP MATERIAL COMPATABILITY Compact laminate, Composite, Solid Wood, Chipboard Laminate
  • NO SET WORKTOP WIDTH RESTRICTION No need for alignment pins for worktop widths
  • FRUSTRATION FREE SETUP Simple intuitive setup; measure, mark, clamp and cut
  • OFFSET CAMS Unique backset wedges for consistent easy setting
  • EDGE PROFILE COMPATABILITY Covers square edge, small radius, Postform radius and bullnose profiles
  • CLAMP RECESSES For below the surface clamping for unrestricted routing with plunge saw clamps

Trend Kitchen Worktop Jig 750 Pro


Multi-material, Multi-function, Multi-backset Worktop Jig for fast, perfect jointing on any worktop from 150mm to 750mm with unique easy set window.

Features

All settings are done from the front edge eliminating any discrepancies from scribing or when using non-standard width worktops.

Simple intuitive setup; measure, mark, clamp and cut. A full male and female joint can be cut in 15 minutes including setting up.

Easy set reference window allows fast set up for any backset, simply align to a measured line.

3, 5, 10, 24, 35mm backsets to meet the demands of new materials, edge profiles and trends.

Jig setup indicators engraved into surface for easy identification and unique backset wedges for consistent easy setting.

Covers square edge, small radius, Postform radius and bullnose profiles with no need for alignment pins for worktop widths.

Recessed clamping slots for below the surface clamping for unrestricted routing with plunge saw clamps.

Allows worktops to be cut flush with door faces for handless contemporary styles without additional measuring or marking up.

Compact Laminate joints can be cut in a single pass, minimises strain on the router and extends cutter life.


Details

  • It’s time to throw the traditional worktop jointing jigs out of the window in favour of the revolutionary ‘Easy Set’ alignment window found on the new KWJ750P Pro Worktop Jig from Trend.
  • With minimalistic thin worktops and flush front edge ‘Handleless’ styles being the latest ‘must have’ kitchen features, the KWJ750P is now the jig you must have; able to cut joints to suit any style, and in multiple materials including compact laminate, composite, solid timber and laminated chipboards.
  • Designed to remove all the issues of jointing when back edges have been scribed, or trying to joint non-standard width worktops with standard jigs, the new Trend Jig is as simple as ‘Measure, Mark, Clamp, Cut’.
  • Unlike standard jigs, no pin is required to set and also limit the joint length so accuracy is guaranteed by taking all the set up and registration positions from the front edge.
  • The jig works across multiple edge profiles as well, so whether they are Postform, Bullnose, small radius or square edge profiles, all styles are covered with 5 different backsets of 3mm, 5mm, 10mm, 24mm and 35mm, set using simple backset cams that match up to settings in the Easy Set window.
  • Minimum joint lengths are 150mm, up to a maximum of 750mm.
  • For harder square edge worktops such a compact laminate, the 3mm backset allows the joint to be made in a single pass with the benefit of reduced router strain, increased cutter life and of course, faster, more productive results; essential for the self-employed trade user looking to earn their corn.
  • Whether it’s a standard, scribed or bespoke width worktop, every joint can now be made with unerring accuracy no matter what the worktop width.
  • Recessed clamping positions around the jig offer additional benefits of easier routing using standard plunge saw rail clamps to secure the jig as you cut.
  • Free of restrictions, the router can be controlled easily through the cut for safer control.
  • Following closely to other Trend jigs, the new KWJ750P Pro maintains its Multi-Function’ capabilities with multiple edge profile and other functions including 100mm & 40mm Radius Cuts, 45° Corner, 400mm Radius Peninsular, 35mm Euro Hinge, 3/4in BSP Mixer Tap Hole, plus 3 open ended bolt recess templates for 150mm, 65mm and Compact Laminate Mini Zip Bolts.
  • The KWJ750P will not only match the current trends and the traditional edge profiles, it is also able to evolve to keep up with new designs, trends and styles as they come in to fashion.

Related Products

Length
985 mm
Width
335 mm
Thickness
12 mm
Weight
4.73 kg
End Cut
45 degrees
Corner Radius
40 mm
Corner Radius
100 mm
Corner Radius
400 mm
Corner Mitre Joint
45 degrees
Female cut material width loss (inset)
variable
Bolt recesses
3
Bolt recess centres
175 + 175 mm
Bolt recess width
14 mm

Requires:

Guide bush
30 mm
Plunge router
1/2-inch (min. 1300 watts)
Cutter
12.7 mm x 50 mm cut
Clamps
Two

Patent Pending

no spare products

Videos

Pro Multi-material KWJ750P worktop jig

Overview video of the KWJ750P Pro Multi-material worktop jig.

How to Cut a 3mm Joint in Laminate using KWJ750P

The same technique applies to the KWJ900P cams and Easy Set Window.

Product Questions

The early KWJ750P jigs came with plastic cams but there were some discrepancies in the lengths of cams, the rods are a lot more accurate and produce a much better joint.

... Read more
Write Your Own Question
Your Question: